Page 542 - Buyers Guide 2023

540
PLANT REMODELING
Template Kit
Simplifies the process of cutting bulk roll
material into individual door strips.
● Fabricated of non-slip 1/4-inch acrylic.
● Dimensions are permanently etched directly on the template.
● Special drill bit bores a perfectly round hole into material to prevent tearing. ● Kit includes template, drill bit and marker.
ITEM NO. G368 2700
NOTE:
We recommend mounting these doors 1 foot above door opening to eliminate tearing strips with tall loads.
F.O.B. FACTORY PRODUCT EACH
QuickmountTM Template Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
All strip doors are designed to mount on either the inside or outside wall above the door opening with a minimum of 5" overlap on each side.
Aluminum HD Strip Door Mounting Hardware
● 70% faster installation time – 90% faster strip replacement time.
● One-piece, heavy-duty 1/4-inch thick aluminum construction won’t rust or corrode.
● Use 3/8-inch bit to drill holes in strip material or template kit shown on facing page.
● 2-inch sections of mounting hardware snap together. ● Includes installation instructions.
NOTE: Purchase QuickmountTM Hardware and Strips and get QuickmountTM Template for FREE! CALL FOR DETAILS.
PRICES ARE SUBJECT TO CHANGE • MINIMUMS MAY APPLY • VISIT WWW.BUNZLPD.COM FOR CURRENT PRICING.
ITEM NO. G368 27021
F.O.B. FACTORY
PRODUCT EACH
2" Section Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bolt-On Universal Galvanized Hardware
A heavy-duty mounting system used when maximum strength
and durability are required.
● Each section comes complete with retaining plates and lock-nuts to secure the strips. ● Made from heavy-duty galvanized steel for ultra-heavy traffic applications.
● Strips held in place by galvanized steel retaining plates and lock nuts.
● Can be mounted on the face of the wall or under the lintel.
CALL 8004565624 for pricing and information.
 SEE PAGES 541-542 For Door Strips
ITEM NO. G368 00031 G368 00071
PRODUCT
3 ft. Section 4 ft. Section
How to figure the AMOUNT OF STRIP NEEDED
1. Measure the opening in feet (WxH).
2. Add 1 foot to the door height and width,
depending on space available.
3. Calculate using the following formula in feet:
● 6"Strips—(WxH)x(1-1/2)x(2)
● 8" Strips — (W x H) x (1-1/2) x (1-7/10) ● 12" Strips — (W x H) x (1-1/2)
8-inch PVC Strips 8-inch PVC Strips 50% overlap. 100% overlap.
$61.51
STRIP DOOR MATERIAL AND MOUNTING TEMPLATE
Concave/Convex Strips
Mounting Options
Scan this QR code with your mobile device to watch a video showing the difference between the door mounting hardware options.
$39.04