Page 537 - Buyers Guide 2023

Tel-Tru Check-Set Calibrators, 3-Inch Stem or Longer
Built-in tool makes adjustments fast and easy!
● Insert 3-inch or longer stemmed thermometer with a 3/8-inch, 7/16-inch or 5/8-inch hex calibration nut into the calibrator and twist. Also, please note the hex key is only for those models with 0.125-inch, 0.150-inch, 0.187-inch well insert.
● Verifies the accuracy of any stem dial thermometers and other temperature devices.
● Each unit serialized and certified traceable to NIST. ● Accuracy is ± 0.02 °F. ● Weight: 9 pounds (4 kg).
● Heavy-duty stainless steel housing. ● No batteries required. ● 5-foot grounded power cord. ● 115 V.
● Check-Set IV (D) has multi-probe receptacles to calibrate all digital and bi-metal thermometers.
● Dimensions: Check-Set I Hot: 11 inch x 6-5/8 inches x 3-1/8 inches. All other Models: 8-3/4 inches x 8-7/8 inches x 4-1/4 inches.
NOTE: Additional stem well sizes available as accessory to use with 3327 00281, 3327 0037 and 3327 03101. SEE BELOW.
Check-Set II (C) and Check-Set IV (D) have multiple points of calibration so you can calibrate closer to the temperature points you use in actual applications — increasing the accuracy of your thermometers!
ITEM NO. 3327 6889 3327 00281 3327 00371 3327 03101
PRODUCT SETPOINT
A. Check-Set I Hot . . . . . . 160 °F . . . . . . . . . . . . . . . . . . . . B. Check-Set I Cold . . . . . 40 °F . . . . . . . . . . . . . . . . . . . . . C. Check-Set II . . . . . . . . 40 °F/160 °F . . . . . . . . . . . . . . . . D. Check-Set IV . . . . . . . .40 °F/150 °F/161 °F/175 °F . . . .
F.O.B. FACTORY FITS PROBE DIAMETERS EACH
Up to 0 .150" . . . . . . . . . . . . . . . . . . . . . 0 .125" 0 .150" 0 .187" . . . . . . . . . . . . . . 0 .125" 0 .150" 0 .187" . . . . . . . . . . . . . . 0 .187" 0 .250" 0 .375" . . . . . . . . . . . . . .
NOTE: Thermometers are sold separately.
Glass Calibration Thermometer
Certified precision instrument used to calibrate both digital and bi-metal thermometers.
● Glass body with gradations and numbers that will not fade or scratch and has a yellow back for easy reading.
● Mercury is encapsulated with Teflon® to contain the mercury in case of breakage. Non-mercury filled model available. ● Certified at 32°, 122° and 212 °F; ranges: 0 °F with 1° divisions.
● NIST traceable certificate of calibration with each thermometer.
A
B
ITEM NO. 3345 2521 3345 12301
Black, plush-lined protective carrying case included with item# 3345 2521
PRODUCT
A. Certified Calibration Thermometer (NOT for Use in California) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to 212 °F . . . . . . . . . B. Certified Calibration Thermometer* (For Use in California) Contains NO Mercury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to 230 °F . . . . . . . . .
*Carrying case not included.
THERMOMETERS
535
PRICES ARE SUBJECT TO CHANGE • MINIMUMS MAY APPLY • VISIT WWW.BUNZLPD.COM FOR CURRENT PRICING.
RANGE EACH
A
BCD
NIST TRACEABLE
CALIBRATION DEVICES
$1,132.43
1,247.59
1,701.82
2,411.44
Well-Inserts
ITEM NO. 3327 00311 3327 00321 3327 00221 3327 00331
PRODUCT EACH
Well Insert for Probe Diameter 0 .156" . . . . . . . . . . . . . . . . . . . . . . . . . Well Insert for Probe Diameter 0 .375" . . . . . . . . . . . . . . . . . . . . . . . . . Well Insert for Probe Diameter 0 .500" . . . . . . . . . . . . . . . . . . . . . . . . . Well Insert for Probe Diameter 0 .750" . . . . . . . . . . . . . . . . . . . . . . . . .
$157.42
157.42
157.42
157.42
Scan this QR code with your mobile device to watch a video about Check-Set IV.
$330.85
294.55